1321 [Main/3-Tray Lcit/Bypass]; 1331 [Interposer] - Ricoh Pro 8300S Operating Instructions Manual

4. Details of Menu Items in Advanced Settings
Paper Feed Mode:Fan Level
Adjust the fan operation if double feed or nonfeed occurs in two-tray wide LCT.
36: Setting

1321 [Main/3-Tray LCIT/Bypass]

Pickup Assist
Specify the paper feed roller movement when using Main Tray, three-tray wide LCT, and multi bypass
tray.
If the paper feed roller fails to pick up paper and misfeeding of paper occurs, set this to [On].
01: Setting

1331 [Interposer]

Fan Setting
Set the fan operation of Interposer.
If [On] is set, the air is blown out from the duct in the paper tray. Blowing on the paper edge makes
paper part easily.
01: Setting
138
Setting Item
Setting Item
Setting Item
Values
[Prevent Double Feed (Weakest Blow)]
[Prevent Double Feed (Weaker Blow)]
[Standard (Default)]
[Prevent Non Feed (Stronger Blow)]
[Prevent Non Feed (Strongest Blow)]
Values
[Off]
[On]
Values
[Off]
[On]