0637 [Staple Tray: Rib Installed Mode To Strengthen Paper]; 0638 [Accuracy Priority For Stapling]; 0639 [Accuracy Priority For Booklet] - Ricoh Pro 8300S Operating Instructions Manual

Setting Item
[Setting]

0637 [Staple Tray: Rib Installed Mode to Strengthen Paper]

Set the operation when the Paper Strengthening Rib is installed to staple tray.
Setting Item
[Setting]

0638 [Accuracy Priority for Stapling]

Set the accuracy priority for stapling when using Finisher SR5110 or Booklet Finisher SR5120.
Setting Item
[Set]

0639 [Accuracy Priority for Booklet]

Set the accuracy priority for a booklet when using Booklet Finisher SR5120.
Setting Item
[Set]
Values
[Default]
[Increase by a Small
Amount]
[Increase by a Medium
Amount]
[Increase by a Large
Amount]
Values
[Off]
[On]
Values
[Speed Priority
(Normal)]
[Accuracy Priority]
Values
[Speed Priority
(Normal)]
[Accuracy Priority]
[Finishing: Finisher 1]
Default Value
[Default]
Default Value
[Off]
Default Value
[Speed Priority
(Normal)]
Default Value
[Speed Priority
(Normal)]
79