0509 [Developer Setup: Result] - Ricoh Pro 8300S Operating Instructions Manual

For details about filling/discharging developer, see the Replacement Guide.
Code Status
1 Succeeded (developer
discharged)
2 Developer not discharged
9 Replenishment quit forcefully

0509 [Developer Setup: Result]

Display the result of the developer setup.
If the developer setup fails, check the displayed code and troubleshoot the problem accordingly. If
countermeasures do not work or a code that is not on the list is displayed, contact your service
representative.
For details about filling/discharging developer, see the Replacement Guide.
Code Status
1 Succeeded
2 Developer setup failure
Causes
-
• The developer bottle is
not attached to the
outlet.
• The developer bottle is
attached to the outlet,
but the outlet shutter is
not open.
• The front covers have
been closed.
• The power was turned
off during the
operation.
Causes
-
• The developer bottle is
not attached to the
outlet.
• The developer bottle is
attached to the inlet,
but its seal has not
been pulled out.
[Main Unit: Maintenance]
Solutions
-
Detach the developer bottle,
attach it to the outlet, and
then try the operation again.
Open the front covers, turn
on the main power, and
then try the operation again.
Solutions
-
Attach a new developer
bottle to the inlet, pull out
the seal, and then try the
operation again.
47