0606 [Punch Position: Across Feed]; 0607 [Punch Position: With Feed] - Ricoh Pro 8300S Operating Instructions Manual

0606 [Punch Position: Across Feed]

Adjust the vertical position of the punch holes when using Finisher SR5110 or Booklet Finisher SR5120.
Press [ ] to move the position forward (up), or [ ] to move it backward (down).
Setting Items
[2 Holes JP/ EU]
[3 Holes US]
[4 Holes EU]
[4 Holes NE]
[2 Holes US]

0607 [Punch Position: With Feed]

Adjust the horizontal position of the punch holes when using Finisher SR5110 or Booklet Finisher
SR5120.
Press [ ] to move the position toward the top edge (left) relative to the paper feed direction, or [ ] to
move it toward the bottom edge (right).
Default Max.
Value Value
0.0 2.0
[Finishing: Finisher 1]
Min.
Step
Value
-2.0 0.5
Unit
mm
59