0631 [Output Trail Edge Press Setting]
Set whether or not to hold the trailing edge of sheets when ejected on the shift tray when using Finisher
SR5110 or Booklet Finisher SR5120.
Setting it [ON] reduces the diversion of sheets due to the paper type and paper condition.
Setting Item
[Set]
0632 [Output Fan Setting]
Set the fan operation to the sheets on the shift tray when using Finisher SR5110 or Booklet Finisher
SR5120.
Air blowing peels off the sheets in close contact.
Setting Item
[Set]
0633 [Output Fan Level]
Adjust the fan volume to the sheets on the shift tray when using Finisher SR5110 or Booklet Finisher
SR5120.
Increase the air level if the sheets are in close contact.
Setting Item
[Set]
Values
[Auto]
[On]
[Off]
Values
[Auto]
[On]
[Off]
Values
[Standard]
[Increase Air Volume]
[Finishing: Finisher 1]
Default Value
[Auto]
Default Value
[Auto]
Default Value
[Standard]
77