Changing A Play Mode; On The Recorder - Sony Walkman MZ-R909 Operating Instructions Manual

3
Within 5 seconds, turn the control
towards . or N> to select
your desired group.
During playback on group mode,
playback of the desired group starts
with the first track in the group and
stops with the last track in the group.
During normal playback, playback of
the selected group starts with the first
track in the group and stops with the
last track on the disc.
Notes
• If no operation is performed within 5 seconds
after step 1, the group skip mode will be
canceled and you will not be able to perform
step 2 thereafter. To continue with step 1 at
this point, repeat from the beginning of the
procedure.
• The group skip mode cannot be used with a
disc that has no group settings.
z
The group skip mode operates regardless of
whether the group mode is on or off.

Changing a play mode

You can play tracks repeatedly in three
ways — all repeat, single repeat, and
shuffle repeat.

On the recorder

Selecting a play mode
1
While the recorder is playing, press
the jog dial, turn the dial until "PLAY
MODE" flashes in the display, and
then press the dial again.
Jog dial
2
Turn the jog dial to select the play
mode, and then press the dial.
Each time you turn the dial, the
display item indicated by A changes
as shown below.
Pressing the jog dial while the item is
flashing changes its play mode.
The new mode then appears in the
window indicated by B.
indicates that repeat play has been
activated for playback.
Display window on the recorder
When you turn the jog dial, A changes.
A
When you press the jog dial, B appears.
B
continued
45