Recording With Analog Input (Line Cable Required) - Sony Walkman MZ-R909 Operating Instructions Manual

Recording with analog
input (line cable
required)
The sound will be sent from the
connected equipment as analog signal but
will be recorded digitally on the disc.
To connect to a sound source, an optional
line cable is required. When connecting
the cable, make sure to insert the
connectors firmly.
CD player,
cassette recorder,
etc. (source)
to LINE OUT
L (white)
Line cable*
∗ Use the connecting cords without an
attenuator. To connect to a portable CD
player having a stereo mini-jack, use
the RK-G136 connecting cord. For
more information on connecting cords,
see "Optional accessories" (page 88).
28
R (red)
REC
to LINE IN (OPT)
1
Insert a recordable MD, and then
press and slide REC to the right.
"REC" and the REC indicator on the
recorder light up in the display and
the recording starts.
2
Play the source you want to record.
For other recording operations, see
"Recording an MD right away!"
(page 22).
z
LINE IN (OPT) jack is for both digital and
analog input.
The recorder automatically recognizes the type
of line cable and switches to digital or analog
input.
Note
If you temporarily stop a recording operation
by pressing X, a track mark will be added at
that point when you press X again to resume
recording. The recording continues from on a
new track.