Sony Walkman MZ-R909 Operating Instructions Manual page 60

Storing phrases while labeling
a track, group, or disc
1
Follow steps 1 to 6 of "Labeling
recordings" (page 55) to enter a
phrase.
2
After entering the phrase, press
CANCEL to remove the cursor from
the character palette to the letter input
area, and then press END SEARCH
for 2 seconds or more.
"Entry!" appears in the display and
the cursor flashes after the phrase you
just stored. You can then continue
with labeling operation.
z
You can store phrases from a previously labeled
track, group, or disc.
Do the procedure "Relabeling recordings"
(page 59) and display the track, group, or disc
name that contains the phrase that you want to
store. Press ./> repeatedly to move the
cursor to the right of the phrase. Then press
END SEARCH for 2 seconds or more to store
the phrase.
Retrieving phrases
You can retrieve a phrase stored in the
recorder's memory anytime you want to
use it in a track, group, or disc name.
There are two ways to retrieve a stored
phrase: by displaying the stored phrases
one by one during the labeling procedure,
or by searching the name bank by the first
letter of the desired phrase.
Note
Phrases stored in the name bank cannot be
retrieved by the procedure described in
"Searching for a phrase by displaying the stored
phrase one by one". To retrieve a phrase from
the name bank, follow the procedure described
in "Searching for a phrase by its first letter".
60
Searching for a phrase by displaying
the stored phrase one by one
1
Follow steps 1 and 2 of "Labeling
recordings" (page 55), and turn the
jog dial until "
" : Name", or "
flashes in the display. Then press the
jog dial.
2
Press END SEARCH so that the
phrase stored in the recorder's
memory appears in the display.
3
Press x to move the cursor from the
letter input area to the character
palette, and then turn the jog dial until
the desired phrase flashes in the
display.
Turning the jog dial causes the
phrases stored in the recorder's
memory to appear one by one in
sequential order.
4
Press the jog dial while the phrase
you want flashes in the display.
The phrase is selected and lights up in
the letter input area.
5
Press the jog dial for 2 seconds or
more.
The phrase is retrieved.
Searching for a phrase by its first
letter
1
When labeling a track, group, or disc,
turn the jog dial in the letter input
area until the first letter of the desired
phrase appears.
2
Press END SEARCH to search so
that the phrase corresponding to the
letter appears.
3
Press x to move the cursor from the
letter input area to the character
palette, and then turn the jog dial until
the desired phrase flashes in the
display.
: Name",
: Name"