Recording A Track Into An Existing Group; To Start/Stop Recording In Sync With The Source Player (Synchro-Recording) - Sony Walkman MZ-R909 Operating Instructions Manual

Recording a track into an
existing group
1
While the recorder is stopped, press
GROUP for 2 seconds or more.
2
Press GROUP slightly.
" " flashes in the display and you
can select a group directly (group
skip mode) (page 44).
3
Within 5 seconds, press . or >
repeatedly until the group you want
the track to belong to appears.
4
Press and slide REC to the right.
5
Play the source sound.
Notes
• Even if "REC-Posi" is set to "From Here",
newly recorded tracks are inserted after the
existing tracks in the specified group without
recording over the current contents.
• The group skip mode turns off automatically
in step 3 if nothing is done within 5 seconds.
To continue the procedure, do step 2 again.
z
To add a track that is playing to a group, stop
playing the track first, and then do the
procedure from step 4.
32
To start/stop recording
in sync with the source
player
(Synchro-recording)
You can easily make digital recordings of
a digital source on an MD.
Before synchro-recording, make
connections to the digital source with a
digital cable, and insert a recordable MD.
CD players,
etc.
Jog dial
REC
1
While the recorder is stopped, press
the jog dial, turn the dial until "SYNC
REC" flashes in the display, and then
press the dial again.
2
Turn the jog dial until "SYNC ON"
flashes in the display, and then press
the dial.
Synchro-recording indication
x