On The Remote Control; Adding A Track Mark - Sony Walkman MZ-R909 Operating Instructions Manual

On the remote control

DISPLAY
Control
1
Press DISPLAY for 2 seconds or
more.
2
Turn the control towards . or
N> until "GROUP" flashes in
the display, and then press
3
Turn the control towards . or
N> until "GROUP ON" appears
in the display and then press
The group mode turns on.
4
While playing a track within a group
whose order you want to change,
press DISPLAY for 2 seconds or
more.
5
Turn the control towards . or
N> until "EDIT" flashes in the
display, and then press
6
Turn the control towards . or
N> until "GP : Move" flashes in
the display and then press
7
Turn the control towards . or
N> to select a destination point
on the disc, and then press
x
x .
x .
.
x
x .
.
x

Adding a track mark

You can add track marks so that the part
after the new track mark is counted as a
new track.
The track numbers will increase as
follows.
1 2
Track marking
1 2 3
Track numbers increase
T MARK
1
While playing or pausing an MD,
press T MARK on the recorder at the
point you want to mark.
"MARK ON" appears in the display,
and a track mark is added. The track
number will increase by one.
z
• The quick search function quickly searches
for specific track or position at which you
wish to add track mark. You can search the
track or position while monitoring either the
track number or name, or elapsed time
(page 42).
• If you add a track mark in a group, the track
number is added in the group.
To add track marks while
recording (except while
synchoro-recording)
Press T MARK on the recorder at the
point you want to add a track mark.
You can use Auto Time Stamp to add
track marks automatically at specified
intervals (except while digital recording)
(page 35).
3 4
4 5
67