Sony Walkman MZ-R909 Operating Instructions Manual page 47

Selecting a play mode
1
Press PLAYMODE while the
recorder is playing.
Each press of the button changes the
play mode indication as shown below
and starts playback in the selected
play mode.
Display window on the remote control
Indication (Play mode)
— (All the tracks are played once.)
r
1 (A single track is played.)
r
SHUF (After the currently
selected track finishes playing, the
remaining tracks are played in
random order)
r
PGM (Tracks are played in the
order that you specified.)
Creating a Program (Program
play)
1
While the recorder is playing, press
PLAYMODE repeatedly until "PGM
" flashes in the display.
2
Turn the control towards . or
N> to select a track number.
Track Program number
number
3
Press RPT/ENT to enter a track
number.
4
Repeat step 2 and 3 to program more
tracks.
Play mode indication
5
Press RPT/ENT for 2 seconds or
more.
Repeat play
1
Press RPT/ENT during playback.
" " appears in the display and the
recorder plays as the selected play
mode repeatedly.
z
• The program play setting will be remain in
memory even after playback finished or is
stopped.
• You can set the program play up to 20 tracks.
• The settings can be stored to the Personal Disc
Memory (page 51).
• You can specify the playback mode for a
selected group when the group mode is on. To
activate the group mode, see "Selecting and
playing desired groups (Group skip mode)"
(page 44).
• The play mode can also be selected when the
recorder is stopped.
Notes
• All program settings are lost when the lid of
the recorder is opened.
• If the recorder is stopped and left inactive for
5 minutes in the middle of a programming
operation, the tracks selected up to that point
are entered as the program.
• You cannot switch the group mode on or off
while programming tracks.
• If you turn the group mode on during program
play, the program play is canceled.
47