Long-Time Recording; When You Do Not Want "Lp:" Added Automatically At The Beginning Of A Track - Sony Walkman MZ-R909 Operating Instructions Manual

Long-time Recording

Select each recording mode according to
the recording time that you want.
Stereo recording is possible at 2 times
(LP2) or 4 times (LP4) the normal (SP
stereo) recording time. Monaural
recording at 2 times normal recording
speed is also possible.
MDs recorded in monaural, LP2, or
LP4 mode can be played back only
on MD players or recorders with
monaural, LP2, or LP4 playback
mode.
REC
Jog dial
1
Press the jog dial, turn the dial until
"REC MODE" flashes in the display,
and then press the dial again.
2
Turn the jog dial to select the desired
recording mode.
Recording Display
1)
mode window
on the
recorder
SP stereo SP
LP2 stereo LP2
LP4 stereo LP4
2)
Monaural MONO
1)
For better sound quality, record in normal
stereo)
stereo (SP or LP2 stereo mode.
2)
If you record a stereo source in monaural, the
sounds from left and right will be mixed.
Recording
4)
time
3)
approx. 80
min.
approx. 160
min.
approx. 320
min.
approx. 160
min.
3)
Items selected by the jog dial.
4) When using an 80-minute recordable MD
3
Press and slide REC to the right.
4
Play the source you want to record.
To stop recording, press x.
The recorder switches back to stereo
recording when you record the next time.
When you do not want "LP:"
added automatically at the
beginning of a track
When "LP:" is added to the beginning of a
track, "LP:" is displayed whenever an
attempt is made to play or edit the disc on
a unit that does not support MDLP mode.
This display lets you know that playback
or editing of the track is not possible on
the machine being used. The recorder is
factory set to add "LP:" ("Stamp ON") at
the start of each track.
If you do not want "LP:" to be added at
the beginning of tracks, do the procedure
below.
1
While the recorder is stopped, press
the jog dial, turn the dial until
"OPTION" flashes in the display, and
then press the dial again.
2
Turn the jog dial until "LP Stamp"
flashes in the display, and then press
the jog dial.
3
Turn the jog dial until "Stamp OFF"
flashes in the display, and then press
the jog dial.
If you want "LP:" added, select
"Stamp ON" in step 3, and then press
the jog dial.
29