Sony Walkman MZ-R909 Operating Instructions Manual page 23

2
Specifying the recording position
1
While the recorder is stopped, press
the jog dial, turn the dial until
"OPTION" flashes in the display, and
then press the dial again.
2 Turn the jog dial until "REC-Posi"
flashes in the display, and press the jog
dial,
3
Record an MD
REC
To
Record from the end of the current
1)
contents
Record over partway through the previous
1)
recording
Pause
Remove the MD
Jog dial
x
3
In order not to record over the current
contents, turn the jog dial until "From
End" flashes in the display, and then
press the jog dial.
All new material will then be recorded
after the end of the current contents.
To record over the current contents,
turn the jog dial until "From Here"
flashes in the display, and then press
the jog dial.
The current contents will then be
recorded over whenever new material
is recorded.
1 Press and slide REC to the right.
"REC" and REC indicator on the REC
switch light up and recording starts.
2
Play the CD or tape you want to record.
To stop recording, press x.
After you press x to stop, the recorder will
automatically turn off in about 10 seconds
(when using batteries) or about 5 minutes
(when using AC power adaptor).
Press
END SEARCH and then press and slide REC
to the right.
Press N, ., or > to find the start
point of recording and press x to stop.
Then press and slide REC to the right.
X 2)
Press X again to resume recording.
3)
x and open the lid.
while "TOC Edit" flashing in the display.)
(The lid does not open
23