Recording A Track To An Existing Group; Playing Groups; Playing A Track In Group Play - Sony MZ-N510CK Notes on installing & operating OpenMG Operating Instructions Manual

Recording a track to an
existing group
You can add a track to an existing group.
1
Press GROUP, and then press . or
> until the group you want to add
a track to appears in the display.
2
Press N while pressing REC •
T MARK.
3
Play the source sound.
Newly recorded track is added after
the current contents in the group.
z
• To add a track that is currently playing to a
group, stop or pause playing the track first,
and then do the procedure from step 2.
• You can set the recorder to always create a
new group without pressing the GROUP
button. See page 52 for details.

Playing groups

The recorder can operate various
playback with a disc which has group
setting.
4-way control key
(., >)
44
MENU

Playing a track in group play

In group play, all groups are played in
order, starting with group 1, followed by
the unassigned tracks ("Group - -").
Playback stops after all the tracks have
been played.
1
Press MENU.
2
Press . or > repeatedly until
"P-MODE" appears in the display,
and then press ENTER.
3
Press . or > repeatedly to
select " Normal", and then press
ENTER.
To cue to the start of a group
(Group Skip)
On the recorder
1 Press GROUP.
2 While " " flashing, press . or >.
Pressing – button cues to the first track in the
current group. Pressing the button again cues
to the first track of the previous group.
On the remote control
1 Press "
"+ or –.
+, –