Table of Contents
Advertisement
System Options
Dept Group (Department Group)
-% Setting
Alpha5000ML owner's manual
The System Options menu includes the options listed in this section.
To open the System Options menu
PRG SYSTEM PARAMETER Options
1 Switch the control lock to PRG.
2 If you are prompted for a Manager Password, type the password number and then
press the enter key. If you did not program a Manager Password, go to the next step.
3 Press the Arrow Down key to select SYSTEM PARAMETER. Press the enter key.
4 Press the Arrow Down key to select Options. Press the enter key.
The rest of this section explains each menu option.
Specifies to set the departments to one department group in order to better management
for department
Select the members for department group
Note
The maximum members for one department group are 10.
You may want to add a default percentage amount to an individual item or to a total,
such as a fixed tip or other service charge. You may also want to deduct a default Minus
Percentage rate from an individual item or from a total, such as an employee discount or
standard sale discount. You can program -% and +% to achieve the two purposes.
There are three members in -% and +% setting: 1%/ 2%/3%.You can program the name,
percentage and attribute of the -% and +%.
You can program the default the percentage for the -% and +% member or you can enter
the rate manually each time the -% and +% key is pressed (Only for 1%).
After Item/ Subtotal
After Item
After Subtotal
After Item& After Subtotal
The +% key can add a percent additional charge to an individual item if you press it
immediately and select one from 1% /2%/ 3% after you ring up an item or adds a percent
additional charge to the sub-total amount of an entire sale if you press it after you press
the subtotal key.
44
Advertisement
Table of Contents
