Error Conditions; The Error Alarm System; Clearming An Error; Voiding Errors - Royal 410DX Instruction Manual

ERROR CONDITIONS

THE ERROR ALARM SYSTEM

The error alarm system warns of an operator error (usually pressing the wrong key for a specific type of entry) or an
error when setting a program option. When the error beep tone sounds, an "E" appears in the display and the
keypad locks. An error tone will also occur if the user tries to use a cash register function that has not been
programmed yet.
To clear the "E" error, simply press the [C] Clear key.
NOTE: After starting a transaction, moving the Control Switch from "reg1" or "reg2" to another position
before completing a transaction will result in an error condition to remind you to finish and total the transaction.
CLEARING AN ERROR
1. Press the [C] Clear key. The tone ends, the display clears and the keypad unlocks.
2. Determine what error was made.
3. Correct the error, continue with the transaction, finish the transaction or restart the program.
NOTE: The [C] Clear key also clears an incorrect entry from the display prior to pressing a registration key.
Once an entry is printed, the [Void] key must be used to correct an error.

VOIDING ERRORS

Once an entry is printed on the tape, the [C] Clear key cannot be used to correct the transaction or entry. Use the
[Void] key to correct an error just registered.

1. Voiding the Entry Just Completed:

If an incorrect entry has been made AND the transaction has not yet been completed (the [#ST/NS] or [amount
tend TOTAL] keys have NOT been pressed), simply press the [Void] key to reverse the last entry BEFORE
continuing with any other entries. The entry is reprinted with a "VOID/CORR" message following the amount and
reversed or subtracted from the transaction.

2. Voiding an Earlier Entry:

To void an earlier entry in a previous transaction:
1. Complete and total the transaction, which includes the erroneous entry.
2. Start a new void transaction that will off-set the original transaction.
3. Press the [Void] key.
4. Re-type the incorrect information for the first item, exactly as originally entered (with the incorrect price or other
error).
5. Repeat Steps 3 and 4 for each item in the original transaction.
6. Total the transaction by pressing the [amount tend TOTAL] key.
7. Then, you can start a new sale with the correct price or correct other information.
8