Transfer Gear Oil - Yamaha Grizzly 300 Owner's Manual

Transfer gear oil

The transfer gear case must be checked for oil
leakage before each ride. If any leakage is found,
have a Yamaha dealer check and repair the ATV.
In addition, the transfer gear oil must be changed
at the intervals specified in the periodic mainten-
ance and lubrication chart.
To change the transfer gear oil
1. Place the ATV on a level surface.
2. Place an oil pan under the transfer gear
to collect the used oil.
3. Remove the seat. (See page 4-12.)
4. Remove the right side cover by pulling outward
on the areas shown, and then pull rearward
as shown.
case
5. Remove the right footboard by removing the
bolts, washers and nuts.
1. Right footboard
8-15
X6
X4
8
1