Yamaha Grizzly 300 Owner's Manual page 97

5. Remove the bolt and pull off the air filter ele-
ment lock plate, and then remove the sponge
material from the air filter element frame.
1
1. Air filter element frame
2. Sponge material
3. Air filter element lock plate
4. Bolt
6. Wash the sponge material gently but thor-
oughly in solvent. WARNING! Always use
parts cleaning solvent to clean the sponge
material. Never use low-flash-point sol-
vents or gasoline to clean the sponge ma-
terial because the engine could catch fire
or explode.
7. Squeeze the excess solvent out of the sponge
4
3
2
8. Check the sponge material and replace it if
9. Apply Yamaha foam air filter oil or other qual-
TIP
The sponge material should be wet but not drip-
ping.
10. Pull the sponge material over the air filter ele-
8-25
material and let it dry. NOTICE: Do not twist
the sponge material when squeezing it.
damaged.
ity foam air filter oil to the sponge material.
ment frame, and then install the lock plate by
installing the bolt
8