Adjusting A Headlight Beam; Replacing The Tail/Brake Light Bulb - Yamaha Grizzly 300 Owner's Manual

Adjusting a headlight beam

NOTICE
It is advisable to have a Yamaha dealer make
this adjustment.
To raise a headlight beam, loosen the headlight
beam adjusting screw, slide the adjusting screw
in direction (a), and tighten the adjusting screw.
To lower a headlight beam, loosen the headlight
beam adjusting screw, slide the adjusting screw
in direction (b), and tighten the adjusting screw.
(a)
(b)
1. Headlight beam adjusting screw

Replacing the tail/brake light bulb

If the tail/brake light bulb burns out, replace it as
follows.
1. Tail/brake light assembly
2. Nut
1
8-47
1. Remove the tail/brake light assembly by re-
moving the nuts together with the washers.
1
2
8