Yamaha Grizzly 300 Owner's Manual page 88

6. Remove the transfer gear filling bolt and
the drain bolt to drain the oil from the transfer
gear oil case.
1. Transfer gear filling bolt
8
1. Transfer gear oil drain bolt
1
1
8-16
7. Install the drain bolt, and then tighten it to the
specified torque.
Tightening torque:
Transfer gear filling bolt:
15 Nm (1.5 m·kgf, 10.8 ft ·lbf)
Transfer gear oil drain bolt:
40 Nm (4.0 m·kgf, 28.9 ft·lbf)
8. Add the specified amount of the recommend-
ed transfer gear oil, and then check the oil
level.
Recommended transfer gear oil:
See page 10-1.
Oil quantity:
1.20 L (1.27 US qt, 1.06 Imp.qt)
NOTICE
Be sure no foreign material enters the transfer
gear case.
9. Install and tighten the transfer gear oil filler bolt.
10. Check the transfer gear case for oil leakage.
If oil is leaking, check for the cause.