1
4
(b)
1. Parking brake lever (unlocked position)
WARNING
Always set the parking brake before starting
the engine. The ATV could start moving
unexpectedly if the parking brake is not applied.
This could cause loss of control or a collision.
Always be sure you have released the parking
brake before you begin to ride. The brake could
overheat if you ride the ATV without releasing
the parking brake. You could lose braking
performance which could cause an accident.
You could also wear out the brakes prematurely.
Drive select lever
The drive select lever is used to shift your ATV into
the low-range, high-range, neutral, and reverse
positions. See the" Operating the drive select lever
and driving in reverse "section on page 6-3 for the
drive select lever operation.
1. Drive select lever
4-7
1