Operation; Starting A Cold Engine - Yamaha Grizzly 300 Owner's Manual

WARNING
Indicates a potential hazard that could result in
serious injury or death.
Read the Owner's Manual carefully before riding
the ATV. If there is a control or function you do not
understand, ask your Yamaha dealer.
WARNING
Read the Owner's Manual carefully to become
familiar with all controls in order to help pre-
vent any loss of control, which could cause an
accident or injury.

Starting a cold engine

NOTICE
See the "Engine break-in" section on page 6-4
prior to operating the engine for the first time.
1. Turn the fuel cock to "ON".

OPERATION

2. Turn the key to "1" and the engine stop switch
to "
3. Shift the drive select lever into the neutral.
The corresponding indicator light should come
on. If the indicator light does not come on, have
a Yamaha dealer check the electrical circuit.
TIP
The engine can be started under the following con-
ditions:
The drive select lever is in the neutral .
The rear brake lever is applied with the drive se-
lect lever in any position. However, it is recom-
mended to shift into the neutral position before
starting the engine.
4. Use the starter (choke) in reference to the fig-
ure:
Position (1):
Cold engine start with ambient temperature
below 5 °C (40 °F).
Position (2):
Cold engine start with ambient temperature
between 0 °C (30 °F) and 30 °C (90 °F).
6-1
".
6