Yamaha Grizzly 300 Owner's Manual page 120

2. Remove the tail/brake light cover by removing
the bolts.
1. Tail/brake light cover
2. Bolts
8
1
2
3. Remove the burnt-out bulb by pushing it in
and turning it counterclockwise.
2
1. Tail/brake light bulb holder
2. Tail/brake light bulb
4. Insert a new bulb into the bulb holder, push it
in, and then turn it clockwise until it stops.
5. Install the bulb holder (together with the bulb)
by pushing it in and turning it clockwise.
6. Install the tail/brake light assembly by install-
ing the washers and the nuts.
8-48
1