Yamaha Grizzly 300 Owner's Manual page 86

6. Install the engine oil drain bolt, and then tight-
en it to the specified torque.
Tightening torque:
Engine oil drain bolt:
15 Nm (1.5 m·kgf, 10.8 ft ·lbf)
7. Refill with the specified amount of the recom-
mended engine oil, and then install and tight-
en the engine oil filler cap.
Recommended oil:
See page 10-1.
Oil quantity:
1.20 L (1.27 US qt, 1.06 Imp.qt)
8
TIP
Be sure to wipe off spilled oil on any parts after the
engine and exhaust system have cooled down.
8. Start the engine, and then let it idle for several
minutes while checking it for oil leakage. If oil
is leaking, immediately turn the engine off and
check for the cause.
9. Turn the engine off, wait at least ten minutes,
and then check the oil level and correct it if
necessary.
10. Place the engine oil cap cover in its original
position, and push inward to secure it.
1. Engine oil cap cover
8-14
1