Adjusting The Throttle Lever Free Play - Yamaha Grizzly 300 Owner's Manual

(b)
1
1. Throttle stop screw
Engine idling speed:
1600–1800 r/min
TIP
If the specified idling speed cannot be obtained as
described above, have a Yamaha dealer make the
adjustment.
6. Install the right side cover. (See page 8-17.)
7. Install the the seat.
(a)
Adjusting the throttle leve free play
The throttle leve free play should be checked
and, if necessary, adjusted at the intervals speci-
fied in the periodic maintenance and lubrication
chart.
The throttle leve free play should measure 5.0–
10.0 mm (0.20 –0.39 in) at the throttle lever. Per-
iodically check the throttle leve free play and, if
necessary, adjust it as follows.
TIP
The engine idling speed must be checked, and ad-
justed if necessary, before adjusting the throttle
leve free play.
1. Slide the rubber cover back.
2. Loosen the locknut.
3. To increase the throttle leve free play, turn
the throttle leve free play adjusting bolt in di-
rection (a). To decrease the throttle leve free
play, turn the adjusting bolt in direction (b).
8-29
8