Figure 3-7 Adapter Cable Run - Siemens Hicom Office PhoneMail Supplement To The Installation And System Administration Manual

4890_ecd.fm
Installing a New HOP E Board into an Existing Hicom CS
Running the Adaptor Cable through the Hicom CS
The complete run of the adaptor cable is shown in Figure 3-7.
HOP Entry board
Pin 1
Service access
port
Tto pin 1
Adapter
cable
Tie wrap
Hicom CS
Adapter
cable
DB-9 plug
ho000014
Figure 3-7 Adapter Cable Run
The adaptor cable must now be connected to the modem cable described in Section 4.1 on
page 4-1. Follow the instructions in Chapter 4, "Building the PC Interface for Your Office Pho-
neMail System".
,
A31003-S1220-D300-3-76D1 March 2000
3-8
HOP/HOP E, Version 2.0, Supplement to the Installation and System Administration Guide