C
Differences Between Software Releases 1.04 and
2.0
This appendix discusses differences between Software Releases 1.04 and 2.0.
C.1
The MAINTAIN Menu
This section refers to the HOP and HOP E Installation and System Administration
Guide .
Software Release 2.0 contains more MAINTAIN menu items than Software Release 1.04. Al-
ways refer to Section A.2 on page A-3 when looking for MAINTAIN menu items.
C.2
Maximum Number of Fax on Demand Requests
This section refers to the HOP Installation and System Administration Guide only.
Section 11.9, "Setting the Maximum Number of FOD Requests" states that the range for the
maximum number for FOD requests is 1 to 9. For Software Release 2.0, the range for the max-
imum number of FOD requests 1 to 5. Default is 1.
C.3
The HOP E Board
This section refers to the HOP E Installation and System Administration Guide only.
Compared with HOP E boards prior to Software Release 2.0, the HOP E board changed slight-
ly. The correct information on a Software Release 2.0 HOP E board is contained in Chapter 3,
"Installing a New HOP E Board into an Existing Hicom CS" of this document. Sections 3.2, "Un-
packing Your HOP E Shipment", and 3.3, "Familiarizing Yourself with the Office PhoneMail En-
try Board", of the Hicom Office PhoneMail Entry, Installation and System Administration Guide
do not apply to a Software Release 2.0 HOP E board.
A31003-S1220-D300-3-76D1, March 2000
HOP/HOP E, Version 2.0, Supplement to the Installation and System Administration Guide
Differences Between Software Releases 1.04 and 2.0
4890_dif.fm
The MAINTAIN Menu
C-1