Order Data - Roland Double Sheet Detector I100 Manual

B0003308 / 1.4 /
13.02.2013
9

Order data

Pos: 39 /Doppelblech/Geräte/R1002/12 Bestelldaten/Bestelldaten I100 @ 0\mod_1184853759812_501.doc @ 4210 @
Control units, for pairs of sensors (transmitter / receiver)
Order information
I100
I100-S
I100-IP65
Sensors
Order information
S/E28
S/E34
S/E34V_16kHz
S/E54
S/E75
S/E28S
S/E34S
S/E34VS_16kHz
S/E54S
S/E75S
MSI18S/E
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Manual
Double Sheet Detector R100 I100
for pairs of sensors
Comment
Control unit, supply voltage is 24 V DC.
Control unit, for pluggable sensors supply voltage is 24 V DC, enclosure with
protection class IP54.
Control unit, supply voltage is 24 V DC, mounted in a protective enclosure with
protection class IP65.
Comment
Pairs of sensors, fixed cable with open wire ends for terminal block wiring.
Standard cable length is 2 meters, lengths up to 20 meters made to order.
When using those sensors with the system I100-S, mount the plug 2277707 at the
transmitter cable and the plug 2277706 at the receiver cable. Please order those
plugs separately.
Pairs of sensors, with plug connector for connecting the sensor cable (order cable
separately).
When using those sensors with the system I100-S, please use the cables SKOISS
and SKOISE.
Pairs of sensors, with plug connector for connecting the sensor cable (order cable
separately).
When using those sensors with the system I100 and I100-IP65, please use the
cables KMSISS-G and KMSISE-G.
Order data
43