Positioning Your Originals - Microtek ArtixScan M2 Getting To Know Manual

Positioning Your Originals

Positioning Reflective Originals
This procedure applies when you use the upper scan bed of the ArtixScan M2 to scan
reflective materials such as photos and prints.
1. Open the scanner lid.
2. Place the original to be scanned face down on the scanner glass bed, towards
the front of the scanner. Center the top of the original along the horizontal ruler
on the scanner.
Note: To scan a book or thick materials/documents, lift the scanner lid out of its
hinge sockets high enough to create room between the originals and the lid.
3. Lower the scanner lid.
ArtixScan M2 Supplement 5