Using The 35Mm Filmstrip Holder - Microtek ArtixScan M2 Getting To Know Manual

B. Using the 35mm Filmstrip Holder
The 35mm Filmstrip Holder can hold 4 strips of film that each consists of six frames. A
total of four 35mm Filmstrip Holders is included in your scanner package.
1. Place the 35mm filmstrip to be scanned into the 35mm Filmstrip Holder, as
2. Put the 35mm Filmstrip Holder into the Main Holder.
3. Insert the whole assembly into the transparency bay of the scanner.
10 ArtixScan M2 Supplement
indicated in the graphic below. The shiny base of the 35mm filmstrip should be
facing down.
Make sure that the red
arrow marks on both the
35mm Filmstrip Holder and
the Main Holder are
pointing to each other
when the holders are put
together