Calibration Setup - Microtek ArtixScan M2 Getting To Know Manual

Calibration Setup

With the target properly positioned on the scanner, turn on your scanner and
let it warm up for about five minutes. Launch the MSP program; the MSP main
window appears.
A
B
A. Choose the scanner model that you are calibrating.
B. Choose the correct target media. If you are calibrating the reflective target, select
C. Select the date code and target type (or reference
D. When all the settings are done, click the Start (or Start Profiling) button. The
32 ArtixScan M2 Supplement
Positive.
number) from the drop-down list that matches your
target. You can verify this information by looking at
the left and right corners of the target's bottom
margin.
If the desired data file is not present in the drop-
down menu, install the IT8 Calibration Data to
update the target profiles in your system.
calibration window will appear, and an initial preview of the target is performed.
D
C