Positioning Documents - Microtek XT3500 User Manual

Positioning Documents

This section shows you how to position a single-sheet document, such as
contact sheets, large pieces of art, and mechanical blueprints, on the flatbed.
1. Raise the scanner lid.
2. Place the document to be scanned facing down on the glass surface of the
3. Lower the scanner lid.
16 XT3500 User's Manual
scanner. Align the top of the document along the horizontal ruler on the
scanner.
To scan a single-sheet of
document:
With the document facing
down on the glass surface
of the scanner, align the top
of the document along the
horizontal ruler on the scanner,
using the arrow printing mark
on the horizontal ruler as a
reference point.
To scan a book or thick
documents:
You may lift up the scanner
lid out from its hinge sockets.
Then, align the inner margin
of a book along the side of the
glass surface of the scanner as
indicated in the graphic, using
the arrow printing mark on the
horizontal ruler as a reference
point.