Microtek ArtixScan M2 Getting To Know Manual page 18

4. Optional: If calibration has been performed, go to the Settings window in
5. Click the Overview button to perform a preliminary scan of your original.
6. Select the Scan Frame tool from the Toolbar in the Preview window, and choose
7. Click the Prescan button to display a detailed image area selected via the
8. Specify your scanning requirements in the Settings window.
9. Adjust image quality if necessary, using the Advanced Image Correction (AIC) tools.
10. If the colors in your film are faded and need restoring, check the "Automatic Color
11. Click the Scan (or "Batch") button in the Preview window to start scanning.
18 ArtixScan M2 Supplement
ScanWizard Pro. Choose the profile you have just created in the Input Profile /
Scanner Profile menu.
the area to be scanned by dragging a rectangle around it. You will see a flashing
frame (marquee) around the selected area.
Scan Frame tool. A thumbnail of the image appears as well in the Scan Job
Queue window.
a) Select a desired image type.
b) Select a desired resolution.
c) Adjust the scan frame settings if necessary.
Restoration" box in the Settings window.
• If ScanWizard Pro was launched from an application program, the image is then
delivered to your application, where the image can be saved, printed, or edited.
• If ScanWizard Pro was launched in stand-alone mode, you will be prompted to
specify the file attributes for the scanned image after the Scan or Batch
button is pressed, such as entering the file name, specifying a folder name of
your own, etc. When you have completed the settings, press the Done/Save
button, and the scanner will automatically scan and save your image based on
your settings.