16.13
Diagnostics connector
–
Set upper segment on the left marking.
Guideline
The light-dark boundary of the upper segment must run
exactly through the right marking.
–
Press UP or DOWN button to select the menu item Off and press
SET button to confirm the test.
402428-01
Diagnostics connector
(CN)
In the factory, a diagnostics adapter has been plugged in for
connection with a diagnostics interface which applies to all
manufacturers.
Info
Unplug the diagnostics adapter to use the KTM diag-
nostics tool.
S03240-10
Following completion of the diagnosis, plug the diag-
nostics adapter back in.
ELECTRICAL SYSTEM 16
1
is located under the front rider's seat.
275