Table of Contents
Advertisement
Note
Transmission damage Incorrect use of the quickshifter+ will damage the transmission.
The quickshifter+ can only be used if the function is enabled in the combination instrument.
The quickshifter+ is not active if you pull the clutch lever.
–
Only use the quickshifter+ in the permitted speed range shown.
Info
If you hear unusual noises while riding, stop immediately, switch off the engine, and contact an autho-
rized KTM workshop.
–
Shift into a higher gear when conditions allow (incline, road
situation, etc.).
–
Release throttle while simultaneously pulling the clutch lever,
shift into the next gear, release the clutch lever, and open the
throttle.
Info
The gear positions can be seen in the figure. The idle
position is between the first and second gears. First
402299-11
gear is used for starting off or for steep inclines.
–
After reaching maximum speed by fully opening the throttle
grip, turn the throttle back so it is ¾ open. This will barely
reduce the speed, but fuel consumption will be considerably
lower.
RIDING INSTRUCTIONS 10
169
Advertisement
Table of Contents
