8 ERGONOMICS
138
–
Position handlebar.
Info
Make sure the cables and wiring are positioned cor-
rectly.
–
Position handlebar clamp. Mount screws
tighten yet.
Marking
S03228-10
edge of the handlebar clamp.
Center line
center of the handlebar clamp.
–
First bolt handlebar clamp with screws
higher side of the handlebar supports so that both parts touch.
–
Tighten screws
Guideline
Screw, handlebar
clamp
1
C
on the handlebar scale is aligned with the top
D
on the handlebar scale is aligned with the
1
1
evenly.
M8
, but do not
onto the longer,
20 Nm (14.8 lbf ft)