Table of Contents
Advertisement
13.17
Checking the chain, rear sprocket, engine sprocket, and chain guide
SERVICE WORK ON THE CHASSIS 13
Info
Turn clockwise to increase the chain tension; turn
counterclockwise to reduce the chain tension.
–
Check the chain tension. (
The chain tension matches the specified value.
Info
Chain wear is not always even, so you should repeat
this measurement at different chain positions.
–
1
Tighten screw
.
Guideline
Screw, eccentric
–
Remove the rear of the motorcycle from the lifting gear.
(
p. 188)
Preparatory work
–
Raise the motorcycle with the rear lifting gear. (
p. 202)
M16
70 Nm (51.6 lbf ft)
p. 188)
205
Advertisement
Table of Contents
