Table of Contents
Advertisement
8 ERGONOMICS
8.3
140
Adjusting the steering angle
S03214-10
–
1
Loosen nuts
.
–
Make sure that sufficient steering angle remains after finishing
the work.
Info
Do not unscrew screws fully.
The screw must be screwed in by at least five full turns.
–
Adjust the steering angle by turning adjusting screws
and right.
Guideline
Minimum spacing between
the mirror bar and wind-
shield
Turn the adjusting screws
steering angle settings are equal
–
1
Tighten nuts
.
Guideline
Remaining nuts,
chassis
2
9 mm (0.35 in)
2
so that the left and right
M8
25 Nm (18.4 lbf ft)
left
Advertisement
Table of Contents
