Table of Contents
Advertisement
16 ELECTRICAL SYSTEM
274
–
Set upper segment on the left marking.
Guideline
The light-dark boundary of the upper segment must run
exactly through the left marking.
–
Press UP or DOWN button to select the menu item Off and press
SET button to confirm the test.
–
Select right cornering light test and wait for a few seconds
until the upper segment of the cornering light lights up con-
402427-01
tinuously.
–
Turn adjusting screw
range.
Guideline
Carefully turn the adjusting screw; do not use force to avoid
damaging the adjuster mechanism.
Adjusting screw torque
Info
S03231-10
Turn clockwise to increase the headlight range; turn
counterclockwise to reduce the headlight range.
If you have a payload, you may have to correct the
headlight range.
2
to adjust the right cornering light
≤ 0.25 Nm (≤ 0.184 lbf ft)
Advertisement
Table of Contents
