Launch Control (Optional); Starting Off - KTM 1290 Super Duke GT Owner's Manual

Hide thumbs Also See for 1290 Super Duke GT:
Table of Contents

Advertisement

10.3

Launch Control (optional)

10.4

Starting off

Pull the clutch lever, shift into first gear, release the clutch lever slowly and at the same time open the throt-
tle gently.
Launch Control is an optional vehicle electronics function.
Launch control adjusts the engine speed in order to achieve the
best possible acceleration.
Launch control can be used for starting off for a maximum of three
times in succession. Launch control is temporarily deactivated
after the third starting off in order to protect the engine, transmis-
sion and cooling system from overloading.
Launch control is also deactivated if all conditions for activation
are no longer met.
Launch control is enabled again in the following cases: the engine
H02000-01
runs for at least three minutes, the engine is switched off for 20
minutes or a distance of 1.5 km (0.93 mi) has been covered.
RIDING INSTRUCTIONS 10
161

Advertisement

Table of Contents
loading

Table of Contents