KTM 1290 Super Duke GT Owner's Manual page 210

13 SERVICE WORK ON THE CHASSIS
208
–
Check chain sliding guard for wear at the recess.
»
If chain rivet
the recess of the chain sliding guard:
–
Change the chain sliding guard.
–
Check that the chain sliding guard is firmly seated.
» If the chain sliding guard is loose:
–
Tighten screws on the chain sliding guard.
Guideline
Screw, chain slid-
ing guard
S01108-10
1
is no longer visible at bottom edge
M5 5 Nm (3.7 lbf ft)
C
of