Table of Contents
Advertisement
E5jK-T
Transfer Output
Connect transfer output (TRSF) to terminal numbers 29 and 30. The internal equalizing circuit for transfer output is as follows:
30
4 to 20mA
29
Transfer output specifications are as follows: 4 to 20 mA DC,
Permissible load impedance: 600 Ω max.,
Resolution: Approx. 2,600
Communications
Terminal numbers 18 to 20, 31 and 32 can be used only on Controllers with Communications Units (E53-AK01/02/03). For details on wiring,
refer to Chapter 6, Using the Communications Function in the E5AK-T/E5EK-T/E5CK-T User' s Manual (H88/H89/H90) .
E5EK Wiring
In the following wiring diagrams, the left side of the terminal numbers indicate the inside of the Controller.
Power Supply
Input 100 to 240 VAC or 24 VAC/DC to terminal numbers 9 and 10 according to the specifications.
Sensor Input
Connect the sensor input to terminal numbers 11 to 14 and 23 as follows according to the input type.
24
+
L
–
E5jK-T
Advertisement
Table of Contents
