Omron E5xK-T series Manual page 12

E5CK-T
Output Unit Ratings and Characteristics
Model Control output 1/Control output 2
E53-R4R4 Relay / Relay
E53-Q4R4 Voltage (NPN) / Relay
E53-Q4HR4 Voltage (PNP) / Relay
E53-C4R4 4 to 20 mA / Relay
E53-C4DR4 0 to 20 mA / Relay
E53-V44R4 0 to 10 mA / Relay
E53-Q4Q4 Voltage (NPN) / Voltage (NPN)
E53-Q4HQ4H Voltage (PNP) / Voltage (PNP)
Option Unit Ratings and Characteristics
Model
E53-CKB Event input
Communications
E53-CK01
E53-CK03
E53-CKF Transfer output
Note: Event input is used for switching the target value, run or stop command, or automatic and manual mode with an external signal input.
Nomenclature
Operation Indicators
12
Relay
Voltage (NPN)
Voltage (PNP)
0 to 10 V
4 to 20 mA
Contact input:
ON: 1 kΩ max., OFF: 100 kΩ min.
No-contact input:
ON: residual voltage 1.5 V max., OFF: leakage current 0.1 mA max.
Transmission method:
RS-232C
Synchronization method: Start-stop synchronization (asynchronous method) Synchronization method: Start-stop synchronization (asynchronous method)
RS-485
Baud rate:
4 to 20 mA DC:
Permissible load impedance: 600 Ω max.
Resolution: approx. 2,600
RUN/RST Key
Output Type
250 VAC. 3 A
12 VDC, 20 mA (with short-circuit protection)
12 VDC, 20 mA (with short-circuit protection)
0 to 10 VDC, Permissible load impedance:
1 kΩ min., Resolution: Approx. 2600
4 to 20 mA, Permissible load impedance:
500 Ω max., Resolution: Approx. 2600
Specifications
Half-duplex
1.2/2.4/4.8/9.6/19.2 kbps
Display 1
Display 2
Up Key/Down Key
Display Key
E5CK-T
Specifications