Selecting An Output Device (Select Output Device) - Canon iR6570 Manual

3
Select the destination to send the Job Done Notice.
If Access Number Management for an Address Book is set to 'On', press [Access Number] ©
enter the access number to specify the address © press [OK]. If you do not want to specify an
access number, press [No Access Number]. (See Chapter 9, "Storing/Editing the Address Book
Settings," in the Sending Guide.)
4
Press [Done].
The display returns to the Express Copy Basic Features screen.

Selecting an Output Device (Select Output Device)

For instructions on this procedure using the Regular Copy Basic Features screen, see
"Selecting an Output Device (Select Output Device)," on p. 1-19.
IMPORTANT
• The Remote or Cascade Copy mode cannot be used with the Rotate Collate, Rotate Group, Saddle
Stitch, Shift (No. Key Entry), Divided Booklet, Transparency Interleaving, Mirror Image, Scan Image
Check, Interrupt Copy, or Sample Set modes.
• If you use the Front Cover/Back Cover or Paper Insertion mode with the Remote or Cascade Copy
mode, Auto Orientation is not performed.
• The Remote Copy mode cannot be used with the Form Composition mode.
• If you use the Form Composition mode with the Cascade Copy mode, it is necessary to assign the
same name to the stored image form in both this machine and the remote copy printer beforehand. If
the assigned image form name in this machine is not set in the remote copy printer, the job is cancelled.
If multiple image forms with the same assigned name are stored in the remote copy printer, different
image may be used for Form Composition.
• If you power the remote copy printer back ON, you need to refresh the settings of the remote copy
printer from the Additional Functions screen. (See "Confirming a Remote Device," on p. 8-21.)
• If you connect the machine directly to other remote copy printers by crossover patch cord, you need to
configure the Ethernet driver as shown below. (See Chapter 2, "Settings Common to the Network
Protocols," in the Network Guide.)
- Auto Detect: Off
- Communication Mode: Full Duplex
- Ethernet Type: 100 Base-TX
Making Copies with Job Done Notice (Others)
7
7-117