Canon iR6570 Manual page 66

2
1
3
4
1-52 Interrupt Mode
Place your originals © set the desired copy modes.
NOTE
• To cancel the Interrupt mode, press [Interrupt].
• To cancel previously set copy modes, press
Press .
When the interrupt copy job starts, [Interrupt] is grayed out.
Once the originals are scanned, remove them from the machine.
When the interrupt copy job is complete, the interrupted job resumes.
IMPORTANT
If you want to continue making interrupt copies, wait until the current interrupt copy job is
complete (end of printing). Then, repeat steps 2 to 4.
. (The Interrupt mode itself is not cancelled.)