Storing New Standard Settings - Canon iR6570 Manual

Storing New Standard Settings

You can store your own copy settings as the Standard Settings.
To store your own standard settings, specify the desired settings on the Regular or Express
Copy Basic Features screen and/or the Special Features screen, and then follow the procedure
below.
1
2
3
4
8
8-18 Customizing Copy Settings
© [Copy Settings] © [Standard Settings].
Press
Press [Store].
Press [Yes].
To cancel storing the currently displayed settings as the Standard Settings, press [No].
The message <Stored in memory.> appears for approximately two seconds on the touch panel
display.
The displayed settings are stored as the Standard Settings.
NOTE
The settings displayed are the currently set copy settings. Press [
settings that do not fit into the display area.
Press [Done].
] or [ ] to display any copy