Naming A Memory Key - Canon iR6570 Manual

G If you select a key that already has settings stored in it:
4

Naming a Memory Key

1
5
2
5-6 Memory Keys
❑
A screen appears, asking for your confirmation to overwrite the previous settings. Press
[Yes].
To cancel overwriting the settings, press [No].
The message <Stored in memory.> appears for approximately two seconds on the touch
panel display.
The stored settings are displayed.
Press [Cancel].
NOTE
You can assign a name to the memory key by pressing [Register Name].
On the Special Features screen, press [Mode Memory].
Select a key ([M1] to [M9]) to name © press [Register Name].
NOTE
• Keys that already have settings stored in them are displayed with a coloured triangle (
lower right corner of the key.
• If you select a key that already has settings stored in it, the settings are displayed.
• You can also name keys with no settings stored in them.
• If there are more stored copy settings than are currently displayed, you can scroll through the list
by pressing [ ] or [ ].
) in the