Recalling A Previous Copy Setting (Recall) - Canon iR6570 Manual

Recalling a Previous Copy Setting (Recall)

For instructions on this procedure using the Regular Copy Basic Features screen, see
"Recalling Previous Copy Jobs," on p. 5-2.
IMPORTANT
• One copy job is defined by setting the number of copies, exposure, zoom, etc., and by pressing
, when the Auto Clear function is 'On', or by calling up a copy job stored in memory. If one of these
keys was not pressed, or if the Auto Clear function is not active, calling up a copy job by pressing
[Recall] is not possible.
• The Standard mode cannot be recalled or stored.
• Identical copy modes that are stored, are counted as one setting.
• Even if a remote copy printer is stored in Recall mode, if the main power of this machine or the remote
copy printer is turned OFF and ON again, the stored settings change to Local Printer. To use the stored
remote copy printer, confirm that the remote copy printer is ON, update the remote copy printer
information after the specified period that you set at the Startup Time Settings in Additional Functions,
and set the Recall mode. (See Chapter 3, "Using a TCP/IP Network," in the Network Guide or
"Confirming a Remote Device," on p. 8-21.)
1
7
7-42 Making a Copy With the Express Copy Basic Features Screen
Press [Recall].
or