F9: Period Of Season - Omron H5S Instruction Manual

6-6-9. F9: Period of Season

The date on which the Time Switch automatically switches
programs can be set.
Setting
The setting is made in F9 (period of season)
of initial setting mode.
Press
TIME ADJ
setting mode to enter initial setting mode.
Give short presses on
move to the F9 display.
Select a season from A to D to set the
period of a season using
Press
WRITE
specify the start date with
WRITE
Press
date with
M
WRITE
Press
(After
WRITE
season can be set.)
⑥
Set the Mode Switch to RUN.
Holding down these Keys rapidly
advances the value.
Pressing HOLIDAY/
decrements the value of the Key that was last pressed.
Note
• The default is as follows.
A : 1. 1 to 12.31 (Jan/01 to Dec/ 31)
B to D : --.-- to --.-- (not specified)
• If the set periods are overlapped, the priority is increased in the following order.
<Example>Setting : A(January 1 to December 31), B(April 1 to September 30)
Performance : A(January 1 to March 31), B(April 1 to September 30), A(October 1 to December 31)
• The year cannot be specified.
• On a leap-year day, February 29, the Time Switch performs the same operation as that of February 28.
• If period setting is not required, set the parameter to --.--.
TIME ADJ
• If is pressed again before confirming the setting, the setting is cancelled.
• To leave initial setting mode, press
for 3 s or more in program
TIME ADJ
h
to confirm the setting and
M
Key and specify the end
and .
D
to confirm the setting.
is pressed, another
or SELECT PRGM/
and
or .
m
and D .
"C" and "D" are not displayed in the 2 channel type.
TIME ADJ
for 3 s or more.
- 56 -
Weekly Yearly
2 chnls 2 chnls
The color indicates flashing.
"C" and "D" are not displayed in
the 2 channel type.
Yearly
4 chnls
A B C D