F4: Total Count Alarm - Omron H5S Instruction Manual

6-6-4. F4: Total Count Alarm

The alarm value can be set for the total count. (
Setting range
0 to 999900 (6 digits)
Count is set in the hundreds.
The default is 0 (The alarm indicator output is off).
Setting
The setting is made in F4 (total count alarm) of initial setting mode.
Press
TIME ADJ
setting mode to enter initial setting mode.
Give short presses on
move to the F4 display.
Alarm value setting display appears
automatically in 2 s after entering F4.
Press or
h
(Pressing HOLIDAY/
decrements the value of the Key that was last pressed.)
h : increments in 1,000 hour unit.
: increments in 10 hour unit.
m
Press
WRITE
(After a one second pause, the screen returns to the initial display of F4.)
Set the Mode Switch to RUN.
Note
• F4 is displayed only when " totl" is selected in F2 (input selection).
• Alarm ( indicator) will be displayed when either total time (F3) or total
count (F4) reaches the set alarm value.
• If an alarm value for the total count is set to 0, the alarm indicator does not appear.
• To leave initial setting mode, press
• If is pressed again before confirming the setting, the setting is
TIME ADJ
cancelled.
for 3 s or more in program
TIME ADJ
to set an alarm value.
m
or SELECT PRGM/
to confirm the setting.
Weekly
2 chnls
The
and
for 3 s or more.
TIME ADJ
- 51 -
Yearly Yearly
2 chnls 4 chnls
6-1)
color indicates flashing.